Skip to main content

How to Remove and Insert the Media Card on the Blackberry Bold 9000

Today, I got a new Blackberry Bold 9000, so there's probably going to be a flurry of Blackberry related posts as I try to install stuff on it.

The Blackberry Bold seems to ship with a 1GB media card, which really isn't enough for serious use. This procedure allows you to replace the card would one that is of a decent size.

Getting the Old Card out and the New One In
  1. On the left-hand side of the blackberry about in line with the Q key, there is a small door with a picture of a card on it. This door opens from the bottom (camera side) of the blackberry upwards.

  2. Once opened, you should be able to see the card in the slot.
    Do not attempt to use tweezers to pull the card out as this will damage the blackberry.

  3. Instead use a finger or pen push the card in further. The slot is spring-loaded and the card should pop out part way. From here you should be able to grab it, but if not, it's safe to use tweezers at this point.
    If you find yourself having difficulty at this stage, try removing the back cover of the Blackberry.

  4. Obtain a new (bigger) MicroSD card from a computer shop and insert it into the slot.
    The writing side should face the back of the Blackberry.
    You may need to use a pen to push the card all of the way in.

Formatting the Card
It's possible that you won't need to format your media card but if, like me, you're transferring a card from another blackberry, (or another user) you might.

In my case, I've been using an 8GB card formatted to 4GB so that it would work on my blackberry 8800. Reformatting the card will enable me to use the extended features.

  1. Go to the Blackberry menu (blackberry button) and click into Options (the spanner icon).

  2. Choose Memory

  3. Press the Blackberry button to get the pop-up menu and choose Format.

  4. You'll be prompted to choose Media Card or Device Memory - make sure that you choose Media Card.

  5. You'll get a warning message - choose Yes.

  6. The format operation should take less than a minute. It did for my 8GB card but it may take a little longer for larger cards. When finished, you'll get an Ok message and your card total space should show up on the screen.
Don't be disappointed if it shows slightly less than expected - that's normal.
My 8GB card showed 7.6GB.

Comments

Anonymous said…
Thanks Gavin, appreciate the help. I've been walking around with my micro sd card half in but didn't know about the spring load and couldn't figure out why it didn't work. Pushed all the way in and now it works...just as easy as that.

cheers

bob
Anonymous said…
Gavin, the Media card they sent me does not fit my Blackberry Bold 9000. Do you have a step by step process? Maybe I am just inserting it wrong.
Gavin Bollard said…
If the card had Micro SD written on it, then it's the right size. If not, don't use it.

There's a picture of a card being inserted here;

Popular posts from this blog

How to Change Your Notification Options for New Lotus Notes Mail in version 8.x

Don't worry, I'm not patronizing you (my readers), I just decided to re-document this for one of our internal users and thought you might want to be able to use it in your own user documentation. WHAT IS THIS DOCUMENT ABOUT? Some people who don't get a lot of mail, like to be notified when such an event occurs. Notification can be; via a sound via a pop-up box via the system tray (where the computer clock is) The pop up box looks like this; Other people, who like myself, get too much mail would rather not be notified. The aim of this document is to tell you how (and where) to turn these options on and off. CHANGING YOUR SETTINGS To change your settings from the Notes 8.x client; On the Menu, click File , then Preferences... On the left hand side , click on the little plus sign to the left of Mail to expand the options. Click on the option marked Sending and Receiving . In the middle section, under receiving, you can control your notifications. If you untick the box mark

How to Create an Auto-Response Mail Message in Lotus Notes 8.5.3+

Why would you do this? Suppose that you have an externally accessible generic email address for your company; support@mycompany.com or info@mycompany.com. You might expose this to the web and allow people to send messages to you. Setting up an auto-response email will tell the senders that their message reached its destination and that it will be dealt with accordingly.  It's also good practice to include links to FAQs or other useful information. Why 8.5.3 The techniques we'll be using here work in older versions of Notes but some of the options seem to have moved around in 8.5.3.  I figured it was a good time to show you where they've moved to. The Procedure Start Domino Designer and open the Mail file to be modified.  A really quick way to do this is to right-click on the application tab and choose "Open in Designer". In the Left hand panel of designer, expand Code and then double-click Agents.  A new window should appear. Click the action

How to Do a Mail Merge to Email using Lotus Notes

Why do one? In today's "green" world, it makes much better sense to send out emails than letters but you still want to personalize them. Sadly, by itself Lotus Notes doesn't support mail merge to email. Of course, we know that outlook does (but then it lets anyone and anything send emails for you - even when you don't want them to). So, how to do it in Notes? OpenNTF The first port of call is OpenNTF ( http://www.openntf.org/ ). This place is full of great things but most of them are really badly documented. Still, these guys give things away for free and they develop in their spare time, so we should be grateful for what we get. There's a great little project there called MailMerge Excel to Notes . Go there, click on releases and download the ZIP file. Getting to the Code The installation is tricky though I've noted that since I asked the author about the install, it's been updated (so maybe these steps are less necessary). Unzip the files to somewher