Skip to main content

An Update on Dragon and the Sony IC Recorder

I'm getting a lot better at Dragon and the Sony IC Recorder. The trick, which was not reported anywhere on the Dragon site or in the documentation, was quite simple.

My older version of Dragon used to start up and load my personal user profile but the newer version needs you to pick it whenever you start. At first, I thought that this was just an annoyance of the upgrade but I've since discovered it's a "feature" of the "Preferred" edition.

Instead of loading my normal profile, I chose to create a new user and was asked, as part of configuration, what type of microphone was going to be used. There was a short list, or so it seemed until I started scrolling. Near the bottom of the list, I found the Sony IC recorder. I selected that and Dragon prompted me to go away and read a large chunk of novel to the stick and then bring it back.

Foolishly, I chose Arthur C. Clark. I think I have been put off his books forever now. If you thought that the movie 2001 was a little tedious, try reading aloud from the novel of 3001. I wish I'd chosen Willy Wonka or Dilbert's guide to management instead.

Anyway, after a gruelling 6 x A4 typed pages, I was finished and reconnected the device to my computer. Clicking the next button in dragon prompted me to select the file and Press Voice Recog... Dragon did the rest.

Dragon did give me this scary message about it probably taking an hour. Given that "Microsoft Minutes" are least 20 minutes long, I was really concerned. Surprisingly though, I went and got a cup of coffee it was done when I returned. (No, I don't take that long to get coffee either).

I tried re-importing stuff from the stick that hadn't read very well previously. I got much better results.

I'm now very happy with the Sony IC recorder and with Dragon preferred, though I'm unhappy with their helpdesk because they made it almost impossible to contact them.

Hopefully my post here will help others.

Comments

Unknown said…
Any tips for training Dragon to comprehend Lotusscript?
Anonymous said…
Any suggestions for training Dragon to comprehend Lotusscript?
Gavin Bollard said…
I don't actually use Dragon for LotusScript but if I did, I'd probably use the Train command to train phrases more than words.

eg: Dim x as string would probably be trained as dimstring - since I would usually want to change x anyway.

Most of the time, I find that using Libraries and a smart text editor (then posting into Notes after) is a better way to go.

Popular posts from this blog

How to Change Your Notification Options for New Lotus Notes Mail in version 8.x

Don't worry, I'm not patronizing you (my readers), I just decided to re-document this for one of our internal users and thought you might want to be able to use it in your own user documentation. WHAT IS THIS DOCUMENT ABOUT? Some people who don't get a lot of mail, like to be notified when such an event occurs. Notification can be; via a sound via a pop-up box via the system tray (where the computer clock is) The pop up box looks like this; Other people, who like myself, get too much mail would rather not be notified. The aim of this document is to tell you how (and where) to turn these options on and off. CHANGING YOUR SETTINGS To change your settings from the Notes 8.x client; On the Menu, click File , then Preferences... On the left hand side , click on the little plus sign to the left of Mail to expand the options. Click on the option marked Sending and Receiving . In the middle section, under receiving, you can control your notifications. If you untick the box mark...

How to Create a Bootable DVD Using Nero Burning ROM 9

I often need to create bootable CDs and DVDs but it's weird because I frequently end up buring myself a new coaster instead. It's not that the process is difficult, just that nero has a few too many options and I forget which ones to choose and end up picking the wrong one. I figured that the best way to avoid this mistake in future would be to write the steps down. Procedure Insert CD or DVD into your DVD Burner. Start Nero Burning ROM 9 Choose DVD-ROM (Boot) or CD-ROM (Boot) depending on what you're creating You'll be prompted for a disk image source. Choose a Nero Source - you'll usually find them somewhere like this... C:\Program Files\Nero\Nero9\Nero Burning Rom\DOSBootImage.ima Leave the Boot Locale as English - unless you really need a different keyboard layout Tick the box marked [X] Enable Expert Settings Choose Hard Drive Emulation and leave any other settings as they are. Click the button marked New Add any files you want but don't try to add operati...

How to Create an Auto-Response Mail Message in Lotus Notes 8.5.3+

Why would you do this? Suppose that you have an externally accessible generic email address for your company; support@mycompany.com or info@mycompany.com. You might expose this to the web and allow people to send messages to you. Setting up an auto-response email will tell the senders that their message reached its destination and that it will be dealt with accordingly.  It's also good practice to include links to FAQs or other useful information. Why 8.5.3 The techniques we'll be using here work in older versions of Notes but some of the options seem to have moved around in 8.5.3.  I figured it was a good time to show you where they've moved to. The Procedure Start Domino Designer and open the Mail file to be modified.  A really quick way to do this is to right-click on the application tab and choose "Open in Designer". In the Left hand panel of designer, expand Code and then double-click Agents.  A new window should appear. Click the action ...